Loading...
  • GBL801

    • Die-cast aluminium body
    • Powder coated finish
    • Matt finish polycarbonate diffuser
    • Matt aluminium reflector
    • Constant current LED driver fitted
    • IP65 weatherproof
    • IK08
    • Ta: -35°C to +45°C
    • LED lifespan: 50000 Hours @ L70, Ta 25°C
    • 3 year warranty
  • THREE CIRCUIT TRACK LIGHT

    GTR925

    • Aluminium body
    • Powder coated finish
    • High transmittance PC lens
    • Adjustable beam angle 20°-60° with scale
    • European brand constant current LED driver included
    • Power factor: 0.95
    • Bridgelux SMD LED chips
    • Colour matching 3 MacAdam steps
    • LED lifespan: 50000 hours @ L80 B10, Ta 25°C
    • Ta: -20°C to +40°C
    • IP20 suitable for indoor use only
    • Non dimmable
    • Beam angle
    • 3-year warranty
  • MAX LENGTH 20M PER FEED GHR2810

    • Ultra long can be used in up to 20m runs with a single power feed with no voltage drop
    • LED strip covered in a sealed silicone rubber sleeves
    • Roll length 20m, cuttable every 100mm at scissors symbol
    • Dimmable with compatible controller or dimmable LED driver
    • 24V Constant Voltage LED driver required
    • Heat-sink recommended
    • IP65 waterproof
    • Ta: -20 to 40°C
    • Lifespan: 50,000 Hours @L70 Ta 25°C
    • 4 year warranty
  • FRAMELESS LED BULKHEAD

    GLW735

    GLWS736

    • Die-cast aluminium body
    • Powder coated finish
    • Opal polycarbonate diffuser
    • Stainless steel screws
    • Moulding shaped silicon gasket
    • Select colour temperature with DIP switch
    • Non-Dimmable
    • IP65 weatherproof
    • IK08
    • Ta: -20 to +45°C
    • LED lifespan: 50000 Hours @ L70, Ta 25°C
    • 5 year warranty
    • GLWS736: Ambient lux less than 30lux, if detected movement, then light up for 1min
  • MAGNETIC BASE CONVERSION KIT GCV227/8

    • High efficiency LED chips
    • Constant current LED driver fitted
    • Select colour temperature with DIP switch
    • Suitable for metal base ceiling oyster or bulkhead only
    • IP20
    • Non-Dimmable
    • Ta: -20 to +30°C
    • LED lifespan: 50000 Hours @ L70, Ta 25°C
    • 5 year warranty
  • GHR2620 NW

    • Roll length 10m, cuttable every 50mm at scissors symbol
    • Max 10m per run
    • Connection length can be extended by certain LED drivers, controllers and repeaters
    • Dimmable with compatible controller or dimmable constant voltage LED driver
    • 24V Constant Voltage LED driver required
    • Heat-sink recommended
    • IP20 suitable for indoor use only
    • Ta: -20 to 40°C
    • Lifespan: 50,000 Hours @L70 Ta 25°C
    • 4 year warranty
  • LED PENDANT LIGHT

    GPL100

    • Aluminium body
    • Powder coated finish
    • Opal acrylic diffuser
    • Built-in trailing edge dimmable driver
    • IP20 indoor use only
    • Ta: -20°C to 45°C
    • LED Lifespan: 50,000 Hours @L70 Ta 25°C
    • 5 year warranty
  • MAGNETIC TRACK LIGHT GML602A

    • Extruded aluminium housing
    • Powder coated finish
    • Easy installation by magnetic holders
    • 24V DC driver required
    • Installation: Recessed / Surface mounted / Suspended
    • IP20 suitable for indoor use only
    • Ta: -20 to +40°C
    • Lifespan: 50000Hrs @ L70, Ta 25°C
    • 5 year warranty
  • MAGNETIC TRACK LIGHT GMD602B

    • Extruded aluminium housing
    • Powder coated finish
    • Easy installation by magnetic holders
    • 24V DC driver required
    • Installation: Recessed / Surface mounted / Suspended
    • IP20 suitable for indoor use only
    • Ta: -20 to +40°C
    • Lifespan: 50000Hrs @ L70, Ta 25°C
    • 5 year warranty
  • MAGNETIC TRACK LIGHT GMS602G

    • Extruded aluminium housing
    • Powder coated finish
    • Easy installation by magnetic holders
    • 24V DC driver required
    • Installation: Recessed / Surface mounted / Suspended
    • IP20 suitable for indoor use only
    • Ta: -20 to +40°C
    • Lifespan: 50000Hrs @ L70, Ta 25°C
    • 5 year warranty
  • MAGNETIC TRACK LIGHT GMP602F

    • Extruded aluminium housing
    • Powder coated finish
    • Easy installation by magnetic holders
    • 24V DC driver required
    • Installation: Recessed / Surface mounted / Suspended
    • IP20 suitable for indoor use only
    • Ta: -20 to +40°C
    • Lifespan: 50000Hrs @ L70, Ta 25°C
    • 5 year warranty
  • LINKABLE SURFACE MOUNTED AND SUSPENDED LINEAR LIGHT

    GCL754 BC

    • Extruded aluminium alloy housing
    • Powder coated finish in black (RAL9005) and white (RAL9003)
    • Seamless connection without light leakage
    • Wattage selectable via DIP switch
    • High efficiency LED chips 150lm/W @ CRI 90
    • Colour matching 3 MacAdam steps
    • LED lifespan: 50000 hours @ L90 B10, Ta 25°C
    • Ta: -25°C to +40°C
  • ASYMMETRICAL IP65 WALL PACK GLW755/6

    • Die-cast aluminium housing
    • Corrosion resistant polyester powder coated 100um thickness
    • Each PCB is equipped with transient voltage suppressors (TVS) to safeguard the LEDs from voltage surges caused by lightning strikes and other transient voltage fluctuations
    • The high uniformity LED optics are crafted from durable optical polycarbonate, known for its resilience against impacts and UV radiation
    • The metal plate offers dual protection for the LED driver, enhancing longevity and safeguarding the LED optics
    • Surge protection to 10kV
    • LED lifespan: 92000 hours @ L70, Ta 25°C
    • Ta: -30°C to + 50°C
    • IP65
    • IK08
    • 5-year warranty
  • UGR<16 LOWGLARE COB LED SPOTLIGHT

    GDL361 GDL362  GDL363  GDL364  GDL365

    • Die-cast aluminium body
    • Powder coated finish
    • Triac dim LED driver included (not coverable)
    • Power factor: 0.9
    • Bridgelux COB LED chips
    • Colour matching 3 MacAdam steps
    • LED lifespan: 55000 hours @ L80 B10, Ta 25°C
    • Ta: -20°C to +40°C
    • IP40
    • Non IC
    • Dimmable
    • UGR<16
    • Flex and plug
    • Double insulation
    • 5-year warranty
  • IP54 UP WALL LIGHT GWL752

    • Die-cast aluminium body
    • Duel purpose suitable for indoor & outdoor use.
    • Frosted glass cover
    • AC LED, no driver required
    • IP54
    • Non-dimmable
    • LED lifespan: 50000 Hours @L70, Ta 25°C
    • Ta:-20°C to + 40°C
    • 3 year warranty
  • ADJUSTABLE LED SPOTLIGHT A11351

    • Die-cast aluminium body
    • Powder coated finish
    • AcTEC constant current LED driver included (not coverable)
    • Power factor: 0.95
    • Osram LED chips
    • Colour matching 3 MacAdam steps
    • LED lifespan: 50000 hours @ L70, Ta 25°C
    • Ta: -20°C to +45°C
    • IP20
    • 5 years warranty
  • UGR<10 RECESSED LED SPOTLIGHT A11331/2

    • Die-cast aluminium body
    • Powder coated finish
    • Triac dim LED driver included (not coverable)
    • CREE SMD LED chips
    • Colour matching 3 MacAdam steps
    • LED lifespan: 55000 hours @ L80 B10, Ta 25°C
    • Ta: -20°C to +45°C
    • IP20
    • UGR<10
    • 5 years warranty
  • Sale!

    UGR<10 RECESSED LED SPOTLIGHT A11341/2

    • Die-cast aluminium body
    • Powder coated finish
    • Triac dim LED driver included (not coverable)
    • Power factor: 0.9
    • CREE SMD LED chips
    • Colour matching 3 MacAdam steps
    • LED lifespan: 55000 hours @ L80 B10, Ta 25°C
    • Ta: -20°C to +45°C
    • IP20
    • UGR<10
    • 5 years warranty
  • UGR<10 RECESSED LED SPOTLIGHT A11311-A11312

    • Die-cast aluminium body
    • Powder coated finish
    • Triac dim LED driver included (not coverable)
    • Power factor: 0.9
    • CREE SMD LED chips
    • Colour matching 3 MacAdam steps
    • LED lifespan: 55000 hours @ L80 B10, Ta 25°C
    • Ta: -20°C to +45°C
    • IP 20
    • IC-F abutted & covered
    • Dimmable
    • UGR<10
    • 5-year warranty
  • WALL WASHER RECESSED LED SPOTLIGHT A11221

    • Die cast aluminium body
    • Powder coated finish
    • Triac dim driver included
    • Driver is not coverable
    • IP 21
    • LED lifespan: 50000 Hours @ L70, Ta 25°C
    • Ta: -20°C to +45°C
    • 5 year warranty
Go to Top